...
Click here
000000 anonimo
language
 
New Mike Website
pdf
 
Accesso senza registrazione! Registrati per conoscere la disponibilità ed i prezzi di acquisto, contattaci tramite email info@larsson-italia.it o telefona allo 051/0395480. Ti aspettiamo!!
back to overview

This product is listed in these product groups:

 

2K UNIVERSAL PLASTIC FILLER 250G
WITH HARDENER PRESTOLITH

2K Universalspachtel PLAS 250G mit Härter Prestolith
H226
Liquid and vapor flammable.
H315
Causes skin irritation.
H319
Causes severe eye irritation.
H361d
Suspected of damaging the unborn child.
H373
May cause damage to organs (specify all organs affected) through prolonged or repeated exposure (specify route of exposure if there is conclusive evidence that no other route of exposure presents this hazard).
JM-No.:
565.10.05
Product:
2K UNIVERSAL PLASTIC FILLER 250G
WITH HARDENER PRESTOLITH

Description


This is an automatic translation. Click here for the original text in German

prestolith® plastic filling spatula

Universally applicable filling and pulling spatula for filling and leveling smaller and larger unevenness; soft thixotropic, with high filling power and elasticity.

 

Two-component polyester filling and drawing filler, as a mixture of a medium-elastic, highly reactive, amine-accelerated polyester resin with various mineral, environmentally friendly fillers (asbestos- and silicone-free), soft, thixotropic.

 

Product specification:

On metal, wood, concrete. For filling holes and bumps, over-filling of pre-treated surfaces during repairs of car body parts, eg metal surfaces, repair and restoration of wood or concrete surfaces, eg stair steps, dowels and screws, etc. Universally applicable throughout hobby and do- Area.

 

- Very good rust protection on bare metal

- Makes a hard surface

- Can be easily overpainted

- Resistant to solvent, propane butane and water

- Easy to grind and polish even after a long time

- No shrinking

- Fast drying

- Very good adhesion on different surfaces

- Highly elastic

 

Characteristics:

- can be sanded after: approx. 20 to 30 minutes

- Pot life at 20 ° C: approx. 4 to 5 minutes

- Flash point: approx. 33 ° C

Density at 20 ° C: 1.85 kg / dm³

- Hardener addition: 2.5%

- Temperature resistance of the hardened material: up to 120 ° C

- Resistant to: acids, alkalis, propellants, solvents, water and de-icing salts

- High elasticity, good adhesion, easy sanding, even after a long time. Suitable for stove enamels

 

Color: ocher

Contents: 250 g

Packing unit: 12


Media

 
 Safety Data Sheet ( DE )
 Safety Data Sheet ( ES )