Return to the translated text click hereAussendurchmesser 23,8mm
Durchmesser für Kolbenbohrung in der Gabel: 13,8mm
Höhe Ventil gesamt:14mm
YSS Gabelventile machen aus einer konventionellen Gabel ein kontrolliertes Gefühl mit verbessertem Strassenkontakt. CAD entwickelt und aus extrem leichten 6061 T6 Aluminium mit 65 Rockwell gehärtet.
Fein einstellbar und verwendbar für fast alle Gabeldurchmesser.
Durch ein ausgeklügeltes System von Bohrungen im Ventil wird der Ölfluss in der Gabel so verändert, dass der Strassenkontakt und die Rückmeldung deutlich direkter wird.
Der Fahrer gewinnt dadurch Sicherheit und Gefühl für den Strassenbelag.
Verwendungsbereich: On-, Offroad, Racing- und Touringanwendungen.
Die Gabelventile kommen fertig eingestellt für die jeweiligen Gabeldurchmesser.
Eine anschließende Feinjustierung kann durch die Ölmenge oder andere Ölviskosität erfolgen.
Wirkprinzip:
Das YSS Gabelventil wird zwischen Kolbenstange und Gabelfeder eingesetzt. Dafür ist es wichtig vorher den Innendurchmesser des Tauchrohres und der Bohrung in der Kolbenstange zu kennen.
Die Feinabstimmung des Gabelventils ist nach Einbau mit geringem Aufwand möglich:
Die Gabelbrücke muss gelöst, das Öl aus der Gabel gezogen und das Gabelventil nach oben herausgehoben werden.
Dann kann mit einem Innensechskantschlüssel die Einstellschraube in Schritten von 2 Umdrehungen angezogen oder wieder gelöst werden.
Bitte hierbei bedenken erst die obere Schraube zu drehen und dann mit der unteren Stopmutter nachziehen.
This is an automatic translation. Click here for the original text in German Outside diameter 23.8mm
Diameter for piston bore in the fork: 13.8mm
Total valve height: 14mm
YSS fork valves turn a conventional fork into a controlled feeling with improved road contact. CAD developed and hardened from extremely light 6061 T6 aluminum with 65 Rockwell.
Finely adjustable and usable for almost all fork diameters.
Thanks to a sophisticated system of holes in the valve, the oil flow in the fork is changed so that road contact and feedback are significantly more direct.
This gives the driver security and a feeling for the road surface.
Area of application: On-, off-road, racing and touring applications.
The fork valves come pre-set for the respective fork diameter.
A subsequent fine adjustment can be made by the amount of oil or other oil viscosity.
Working principle:
The YSS fork valve is inserted between the piston rod and fork spring. It is important to know the inner diameter of the dip tube and the bore in the piston rod beforehand.
Fine tuning of the fork valve is possible with little effort after installation:
The fork bridge must be loosened, the oil drawn from the fork and the fork valve lifted up.
The adjusting screw can then be tightened or loosened in steps of 2 turns using an Allen key.
Please consider turning the upper screw first and then tightening with the lower stop nut.